3.16pre Bugs here, please

Overlapped Items' edges are not resized in FIPM 

As you can see, you can't resize left item's right edge when there is another item below in FIPM.

Undo bug: Dual Trim in grouped items 

As you can see, after I use Ctrl+drag to resize right item's left edge and hit Ctrl+z, I can use dual trim on selected items only.

Crossfades when items have different trims 

To recreate: Set the left item trim higher than the right (both need to be lower than max though). Move the right trim up and down to show it clearer Make sure 'Item Mix Behavior' is not set to 'Items always replace earlier items' Will work on the left item in FIPM mode (mess with it, you'll see)

I'm noticing weird behavior when moving several items in FIPM mode, and when some of them are offscreen. If the items are lined up, their positions will mess up badly. Here's three pics: Three items lined up before moving Zoomed up with two items offscreen (all 3 are selected!) After moving and zoomed out: This definitely shouldn't happen! The situation is the same here as per EricM's screencast. If heights are changed when some items are offscreen, they all change the same amount. But move... not yet.

Could someone who sees this problem (FIPM position or height changes only affecting onscreen items, not all selected items) possibly upload a project (no media needed) that is at the right zoom level to reproducibly show this error? Meaning, open the project, move or resize the FIPM items, then zoom out and see that not all selected items were moved or resized.

It's enough to have one item go completely off screen to mess up the position. Heights are doing good, they are working for both on-screen and off-screen items. Here's a project for you, schwa. Zoom level is set up. Zoom out to see all items are selected.Try to move the selected items. It works. Then zoom back in to the zoom level from right after opening the project. Then move the items. Then zoom out and see what happened to the off-screen item;)

OK thanks .. that seems seems like the missing piece of information, this only occurs on items that have *never* been shown in the project. Does that sound right?